Loading ...
Loading ...
Loading ...
Frequently asked questions
102
Problem Possible cause and solution
Fault 406-408 Water inlet fault.
One of these numbers will appear in the display if the flow
pressure is too low and the program will be cancelled.
The flow pressure at the water intake point is too low
(see "Technical data"). Contact Miele Service for advice.
Fault 412-414 Water inlet fault.
One of these numbers will appear in the display if the flow
pressure is too high and the program will be cancelled.
The flow pressure at the water intake point is too high
(see "Technical data"). Contact Miele Service for advice.
Check drainage The water outlet is restricted. There might be water in the
wash cabinet.
Clean the filter combination (see "Cleaning and care").
Clean the drain pump (see "Frequently asked
questions").
Clean the non-return valve (see "Frequently asked
questions").
Remove any kink or loop in the drain hose.
Fault 433 The door was obstructed when closing and cannot be
drawn into the final closed position.
Remove the obstruction from the vicinity of the door.
Fault 438 Heavy objects positioned in front of the dishwasher prevent
the Comfort Door Lock from automatically opening the
door.
Do not place any (heavy) objects in front of the
dishwasher door.
Fault 492, 504, 541 Fault during program start. There may still be water in the
wash cabinet.
Clean the filter combination (see "Cleaning and care").
Clean the non-return valve (see "Frequently asked
questions").
Fault 550 The Waterproof system was activated.
Close the water supply valve.
Contact Miele Service.
Fault578 The peak-load cut-out has lasted longer than 3hours.
Have your electrical system and your energy
management system tested by a suitably qualified
person.
Loading ...
Loading ...
Loading ...