Loading ...
Loading ...
Loading ...
^
Make the worktop cut-out for the
cooktop in accordance with the
building-in diagram. Remember to
maintain a minimum safety distance
(see "Safety instructions for
installation").
^
Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
Make sure these materials do not
come into contact with the surface
of the worktop.
^ Feed the connection cable down
through the cut-out.
^ Place the cooktop in the cut-out
without securing it.
If, during installation, you find that the
seals on the corners are not flush
with the worktop, the corner radii ß
R4, can be carefully scribed to fit.
^ Connect the cooktop to the mains
electricity supply (see "Electrical
connection").
^
Connect the appliance to the gas
supply (see "Gas connection").
^
Secure the appliance at the front and
rear using the brackets supplied.
Installation
37
Loading ...
Loading ...
Loading ...