Loading ...
Loading ...
Loading ...
Switching on
^
The control for the burner required must be pressed in and
turned anti-clockwise to the large flame symbol to switch
on.
When a control knob is activated, a spark is generated on
all burners. This is not a fault.
^
When the flame ignites, keep the control pressed in for
8-10 seconds, and then let it go.
^
Should the flame be extinguished earlier, turn the control
knob to "ß". Wait at least 1 minute before trying again. If
necessary, keep the control pressed in for longer.
If the burner does not ignite after a second attempt, turn the
control back to "ß" and go to the "Problem solving guide" for
advice.
In the event of a power cut
If there is an interruption to the electricity supply, the gas can
be ignited with a match.
^ Press in the relevant control and turn it anti-clockwise to the
largest flame symbol.
^ Hold the control pressed in and light the gas at the burner
with a match.
Keep the control pressed in for a further 8-10 seconds and
then release it.
Operation
18
Loading ...
Loading ...
Loading ...