LG Electronics S5MB Styler Steam Clothing Care System

User Manual - Page 42

For S5MB.

PDF File Manual, 48 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
42
TROUBLESHOOTING
Operation
Symptoms Possible Cause & Solution
The appliance won’t
operate.
Control panel has powered off due to inactivity.
This is normal. Touch the
Power
button to turn the appliance on.
Cord is unplugged.
Make sure cord is plugged securely into a working outlet.
Circuit breaker/fuse is tripped/blown.
Check house circuit breakers/fuses. Replace fuses or reset breaker. The
appliance should be on a dedicated branch circuit.
Appliance is not connected to 220-240 V socket.
Make sure the cord is plugged into a grounded socket rated for this
appliance.
The programme won’t
start.
Start/Pause button was not touched after the programme was set.
• Touch
Start/Pause
button.
Programme is producing steam.
There may be a period of inactivity while steam is produced.
Control panel is locked.
Disable the locking of the control panel and touch
Start/Pause
button.
Smoke comes out
when the door is
opened.
Door is opened during operation.
It is normal for steam or hot air to escape if the door is opened during
operation.
Full water supply tank
is empty after just one
use.
Appliance is being used for the first time.
A larger amount of water is needed the first time the appliance is used to
fill the empty reservoir.
Appliance makes a
loud vibrating noise on
startup.
Moving hanger is balancing load before operation.
This is normal at the beginning of the programme. If the noise increases
or continues for a long time, call for service.
Styling times are
taking longer than
estimated.
Clothes were extremely wet when loaded.
Styling times may be longer for very wet or bulky clothing. Dry damp
clothes before putting them in the appliance. The appliance stops
automatically when clothes are dry.
Appliance is moving
from left to right while
operating.
Floor under appliance is not level or is not sturdy enough to support the
weight of the appliance without flexing.
Install the appliance where the floor is level and sturdy. Compensate for
any slight unevenness in the floor with the levelling legs.
Sound of motor
whirring.
Compressor is running during styling.
This is normal.
Loading ...
Loading ...
Loading ...