Loading ...
Loading ...
Loading ...
en Troubleshooting
46
Error code / Fault display / Signal
Fault Cause Troubleshooting
E:12 lights up. Heating element is furred
up.
1. Descale the appliance.
2. Operate the appliance with the Wa-
ter softening system.
E:14 lights up. Water protection system is
activated.
1. Turn off the water tap.
2. Call "Customer Service"
→Page58.
E:15 lights up. Water protection system is
activated.
1. Turn off the water tap.
2. Call "Customer Service"
→Page58.
E:16 lights up. Water is continuously run-
ning into the appliance.
1. Turn off the water tap.
2. Call "Customer Service"
→Page58.
E:18 or indicator for water
supply lights up.
Supply hose is kinked.
▶
Install the supply hose without
kinks.
Water tap is turned off.
▶
Turn on the water tap.
Water tap is jammed or
furred up.
▶
Turn on the water tap.
The flow rate must be at least 10 l/
min when the water supply is open.
Filter in the water supply is
blocked.
1. Switch off the appliance.
2. Pull out the mains plug.
3. Turn off the water tap.
4. Unscrew the water connection.
5. Remove the filter from the supply
hose
6. Clean the filter.
7. Re-insert the filter in the supply
hose.
8. Screw the water connection back
on.
Loading ...
Loading ...
Loading ...