Dji RS 2 User Manual

Loading ...

DJI RS 2 User Manual

Motor Parameters

Auto Tune: the stiness value is determined by the payload of the gimbal. Use Auto

Tune to obtain the stiness value automatically after balancing.

Tap Auto Tune and DJI RS 2 automatically calculates the result based on the weight of

the gimbal setup. Alternatively, press and hold the M button and trigger simultaneously

for four seconds to start auto tune without using the app.

The auto tune process takes approximately 15 to 30 seconds. After auto tune, you

can see detailed motor diagnostics at the bottom of the screen. If the gimbal is

properly balanced, the power value of the motors should be in the range of ±5. If

power consumption on a particular axis constantly goes beyond that range, check the

mechanical balance of DJI RS 2.

Stiffness: the motor stiffness adjustment allows you to fine-tune the power that is

applied by the motors as they react and balance the weight on each axis. Make sure

you leave an extra margin to ensure stability at all times. If the stiffness value is too

high the gimbal may shake and if the value is too low the gimbal performance will be

aected.

When using auto tune, make sure the three axes are unlocked and that DJI

RS 2 is placed on a steady surface in Upright or Underslung mode.

Make sure the gimbal is balanced and the stiness values are tuned properly

every time you change the camera or lens.

Loading ...

Dji RS 2