Dji RS 2 User Manual

Loading ...

DJI RS 2 User Manual

* The functions of the camera control button and front dial vary according to the camera and require the camera

control cable to be connected. Refer to the DJI RS 2 Camera Compatibility List on https://www.dji.com/support/

compatibility for more information.

The duration and stay time can be set on the waypoint settings screen after a waypoint

is added and the position of the waypoint also can be reset. The duration indicates how

much time it will take for the gimbal to travel from one waypoint to the next. The stay

time indicates how long the gimbal will remain steady at the waypoint before moving to

the next waypoint.

Panorama

Panorama allows users to capture a series of interconnecting still images with precise

control based on the settings. Users can then generate a panorama using image

processing software. The camera captures interconnecting still images based on

the setting range when selecting 3x3 or 180° panorama. When creating a custom

panorama, users need to set the shooting range, sensor type, lens focal length,

overlap, and interval.

Time Tunnel

Allows users to capture a Timelapse while the gimbal is in 3D Roll 360 mode. The

number of photos and the duration of the video can be calculated after setting the

interval, duration, and the frame rate. The starting angle and the number of rotations

will determine the way that the gimbal will move. Tap Start to begin shooting and check

progress by tapping Preview.

Make sure the camera and gimbal are connected using the corresponding

camera control cable before using Timelapse, Panorama, or Time Tunnel. The

interval time between shooting photos should be set to one second more than

the shutter time to avoid blurred footage when using a long exposure.

Button Functions

Power Button

Press and hold to power on or o.

Tap to lock or unlock the touchscreen.

Press twice to enter or exit sleep mode.

Battery Level Button

Press once to check battery leve

Trigger

Tap once to start ActiveTrack (requires

the Image Transmission System to be

enabled).

Press and hold to enter Lock mode.

Tap twice to re-center the gimbal.

Tap three times to turn the gimbal

180° so that the camera faces you

(sele mode).

Front Dial*

Turn to control focus (default setting).

Camera Control Button*

Press halfway for autofocus.

Press once to start or stop

recording.

Press and hold to take a photo.

Joystick

Push up or down to control the

movement of the tilt axis (default

setting). Push left or right to control

the movement of the pan axis (default

setting).

Loading ...

Dji RS 2

User Manual - Page 19