Dji RS 2 User Manual

Loading ...

DJI RS 2 User Manual

To avoid fire, serious injury, and property damage, observe the following safety

guidelines when using, charging, or storing the grip.

Grip Use

1. DO NOT allow the grip to come into contact with any kind of liquid. DO NOT

leave the grip out in the rain or near a source of moisture. DO NOT drop the grip

into water. If the inside of the battery comes into contact with water, chemical

decomposition may occur, potentially resulting in the battery catching on re, and

may even lead to an explosion.

2. If the grip falls into water by accident, put it in a safe and open area immediately.

Maintain a safe distance from the grip until it is completely dry. DO NOT use the grip

again, and dispose of the grip properly as described in the Grip Disposal section.

3. Put out any re using water, sand, re blanket, or a dry powder re extinguisher.

4. DO NOT use non-DJI batteries. Go to www.dji.com to purchase new batteries. DJI

takes no responsibility for any damage caused by non-DJI batteries.

5. DO NOT use or charge a swollen, leaky, or damaged grip. If the grip is abnormal,

contact DJI or a DJI authorized dealer for further assistance.

6. The grip should be used in temperatures from -20° to 45° C (-4° to 113° F). Use of

the grip in environments above 50° C (122° F) can lead to a re or explosion. Use of

grip below -10° C (14° F) can lead to permanent damage.

7. DO NOT use the grip in strong electrostatic or electromagnetic environments.

Otherwise, the battery control board may malfunction.

8. DO NOT disassemble or pierce the grip in any way or the battery may leak, ignite,

or explode.

9. DO NOT drop or strike batteries. DO NOT place heavy objects on the grip or

charger.

10. Electrolytes in the battery are highly corrosive. If any electrolytes make contact with

your skin or eyes, immediately wash the aected area with fresh running water for

at least 15 minutes, and then see a doctor immediately.

11. DO NOT use the grip if dropped.

12. DO NOT heat batteries. DO NOT put the grip in a microwave oven or in a pressurized

container.

13. DO NOT manually short-circuit the grip.

14. Clean grip terminals with a clean, dry cloth.

Grip Charging

1. DO NOT leave the grip unattended during charging. DO NOT charge the grip near

ammable materials or on ammable surfaces such as carpet or wood.

2. Charging the grip outside of the temperature range of 5° to 40° C (41° to 104° F) may

lead to leakage, overheating, or battery damage. The ideal charging temperature is

22° to 28° C (72° to 82° F).

Loading ...

Dji RS 2