Loading ...
Loading ...
Loading ...
Operating the appliance en
13
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 24.
1. Plug in the mains plug.
2. Turn the tap on.
3. Open the washing machine door.
4. Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
~ Page 15.
Use the programme selector to select
the required programme. Can be turned
in both directions.
The appliance is switched on.
The programme default settings and
loading information for the selected
programme appear in the display panel:
■ The programme duration,
■ The preset temperature,
■ The preset spin speed and
■ The maximum load.
Change the programme
default settings
You can change the programme default
settings:
To do this, repeatedly press the
required button for the programme
default settings until the required setting
is displayed in the display panel. Then
press the "Start" button to start the
programme.
The programme default settings are not
saved when the appliance is switched
off.
Programme default settings
~ Page 11.
Placing laundry into the drum
:Warning
Risk of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
■ Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual items of
laundry may lead to imbalances.
■ Observe the maximum specified
load. Overfilling has a negative
impact on the washing result and
promotes creasing.
1. Unfold presorted items of laundry
before placing them in the washing
drum.
Loading ...
Loading ...
Loading ...