Loading ...
Loading ...
Loading ...
CHANGING THE DAB STATION INFORMATION
In DAB broadcasting, on the display, the first line shows a station name, and the
second line shows the service information for the current station. Seven types of
information are available.
• Press INFO / RDS repeatedly to cycle through the display information.
USING THE MENU CONTROL
The menu control lets you access the DAB radio setup options.
1.
In DAB mode, press MENU to enter the menu options.
➜ The first setup option "Manual tune" is displayed.
2.
Press
TUNING +/-
to scroll up and down the menu options:
Manual tune - > Autoscan local -> Autoscan full - > DRC value
- > Sw version
3.
To select an option, press
2;
.
4.
Repeat steps 2-3 if sub-option is available under one option.
MANUAL TUNE
By using this feature, it is possible to manually tune to a specific channel/fre-
quency. In addition to antenna orienting for better radio reception, the optimum
reception can also be obtained by using this feature.
1.
In DAB mode, press MENU to display "Manual tune" option.
2.
Press
2;
to make a selection.
➜ Display shows a channel and its frequency.
3.
Press
TUNING +/-
repeatedly until desired channel/frequency appears.
4.
Press
2;
to confirm the selection.
•
You may press INFO / RDS to change the service information on the display.
•
You may
adjust the position of the antenna to obtain the optimum signal
strength.
LOCAL SCAN AND FULL SCAN
Local scan is used to perform a small range of DAB radio search (in UK). Full
scan is used to perform a wide range of DAB radio search (outside UK).
1.
In DAB mode, press MENU to enter the menu options.
2.
Press
TUNING +/-
repeatedly until ” Autoscan local“ or ”Autoscan full“
is displayed.
3.
Press
2;
to confirm the selection.
➜ The local or full scan starts.
DYNAMIC RANGE CONTROL (DRC)
DRC adds or removes a degree of compensation for the differences in the
dynamic range between radio stations. For example, a station broadcasting pop-
ular music may have a high level of compensation applied since the emphasis is
on a constant high listening level, whereas a station broadcasting classical
music will have little or no compensation as the listener requires all of the highs
and lows in the music to define the detail.
There are three levels of compensation:
DRC 0: No compensation applied.
DRC 1: Maximum compensation applied (This is the default.).
DRC1/2: Medium compensation applied.
1.
In DAB mode, press MENU to enter menu options.
2.
Press
TUNING +/-
repeatedly until "DRC value" is displayed.
3.
Press
2;
to enter the sub-menu.
➜ The current DRC level displays on the first line.
4.
Press
TUNING +/-
to select a DRC value (DRC 0, DRC 1 and DRC1/2)
displayed on the second line.
5.
Press
2;
to confirm the selection when the requied value is displayed.
➜ You should be able to hear the difference in compression immediately.
Helpful hints:
– The best way to determine which of these DRC value settings suits you best
is to experiment with them on a variety of source material.
SOFTWARE VERSION
This is only provided as the version number for this product.
DCB310_05_CCR 6/27/08 15:33 Page 6
Loading ...
Loading ...
Loading ...