Loading ...
Loading ...
Loading ...
LEFT SIDE
headlight beam adjustment knob
rear suspension spring pre-load adjustment switch
hazard switch
41
Hazard Switch
Controls & Features
Instruments & Controls
The hazard switch is used to activate the hazard lights on your motorcycle if you
need to stop near heavy traffic or if your motorcycle is disabled.
To operate, turn the ignition key to the ON or ACC position, and push the
hazard switch. The front and rear turn signals will blink simultaneously until
you push the switch again.
If you anticipate using the hazard system for an extended time, use the ACC
position and turn off all unnecessary accessories to conserve battery capacity.
Be sure to turn the switch off when the hazard warning is no longer required, or
the turn signals will not work properly and may confuse other drivers.
０８／１１／２１ １０：３２：３９ ３１ＭＣＡ６９０ ００４８
Loading ...
Loading ...
Loading ...