Loading ...
Loading ...
Loading ...
−−0.039 0.043 in (1.00 1.10 mm)
spark plug gap
side electrode
179
Spark Plugs
Servicing Your Honda
An improperly tightened spark plug can damage the engine. If a plug is too
loose, a piston may be damaged. If a plug is too tight, the threads may be
damaged.
Inspect the electrodes and center porcelain for deposits, corrosion, or carbon
fouling. If the corrosion or deposits are heavy, replace the plug. Clean a
carbon or wet-fouled plug with a plug cleaner, if available, or a wire brush.
Check the spark plug gap using a wire-type feeler gauge. If adjustment is
necessary, bend the side electrode carefully.
The gap should be:
First, tighten the plug:
NGK: turn after it seats.
DENSO: turn after it seats.
Then loosen the plug.
Next, tighten the plug again:
1/8 turn after it seats.
If installing a new plug, tighten it twice to prevent loosening:
If the old plug is good:
1/8 turn after it seats.
Reinstall the left and right cylinder head side covers.
Reinstall the spark plug caps. Take care to avoid pinching any cables or wires.
Tighten each spark plug:
With the plug washers attached, install the spark plugs in by hand to prevent
cross-threading.
1/2
3/4
a)
c)
b)
5.
6.
7.
8.
9.
10.
０８／１１／２１ １０：５５：５０ ３１ＭＣＡ６９０ ０１８６
Loading ...
Loading ...
Loading ...