Loading ...
Loading ...
Loading ...
229
If Your Engine Overheats
Taking Care of the Unexpected
Continuing to ride with an overheated engine can cause serious engine damage.
A steaming engine indicates a coolant leak. Shut the engine off and wait until
the steaming stops. Look for a leak, but don’t touch the engine or radiator
system. Let everything cool off first.
If there’s no obvious problem, leave the engine on so the fan and coolant
circulating system can continue working. Monitor the temperature gauge. The
needle may drop to the normal range after a brief stop with no load on the
engine.
Check the radiator fan.
If the fan is not working, turn the engine off. Open the fuse box (page )
and check the radiator fan fuse. If the fuse is blown, replace it with the proper
(same rating) spare fuse. Start the engine. If the needle climbs to the red zone
and stays there, turn the engine off.
If the radiator fan is working, visually check the coolant level in the reserve
tank, located behind the left engine side cover. It isn’t necessary to touch the
radiator system.
Normally, the needle on your temperature gauge will rise to a point about
midway between C (cold) and H (hot) and then level off. Hot weather may
cause the needle to rise higher than normal. So will temporary stress such as
climbing a hill. If you’re stuck in stop-and-go traffic, the needle may climb
some, but the radiator fan is designed to prevent overheating. Be aware of these
variations as you monitor the gauge.
If your vehicle is operated at sustained speeds between 10 and 15 miles per
hour in high ambient temperature conditions, you may experience high
temperature gauge readings.
If the temperature gauge rises, shifting to second gear or altering your speed
(either faster or slower) may reduce the temperature reading. If the indicator
reaches the red zone, as soon as it is safe to do so, pull over and let the engine
idle until the indicator drops.
(cont’d)
232
０８／１１／２１ １１：０４：２５ ３１ＭＣＡ６９０ ０２３６
Loading ...
Loading ...
Loading ...