Loading ...
Loading ...
Loading ...
23EN
Remote control batteries
• 2 x AAA-R03-1.5 V
Laser
• Type: Semiconductor laser GaAIAs (CD)
• Wave length: 645 - 665 nm (DVD),
770 - 800 nm (CD)
• Output power: 6 mW (DVD),
7 mW (VCD/CD)
• Beam divergence: 60 degrees.
8 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the home theater do not
work.
• Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
• Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
• Make sure that the HDMI cable is not
faulty. If it is faulty, replace it with a new
cable.
• If this happens when you change the HDMI
video resolution, switch to its default mode:
Press to open the disc compartment, and
then press 304 on the remote control.
• Wait for 10 seconds for auto recovery,
or change the HDMI video setting (see
'Picture resolution' on page 17).
Discdoesnotplayhigh-denitionvideo.
• Make sure that the disc contains high-
denition video.
• Make sure that the TV supports high-
denition video.
• Use an HDMI cable to connect to the TV.
Loading ...
Loading ...
Loading ...