Loading ...
Loading ...
Loading ...
16
GB
Antenna
Find a location and an orientation that
provide good reception when you set
up the antenna.
Keep the antenna away from the AC
power cord (mains lead) and the USB
cable to avoid picking up noise.
Power
Connect the AC power cord (mains
lead) (supplied) to the unit, then plug it
into a wall outlet.
If the AC plug of your unit does not fit
into the wall outlet, attach the supplied
AC plug adaptor (only for models
supplied with the AC plug adaptor).
The demonstration appears in the
display panel. Press to turn on the
system and the demonstration
automatically ends.
Insert the two supplied R03 (size AAA)
batteries by matching the polarities as
shown below.
Do not mix an old battery with a new
one or mix different types of batteries.
If you do not use the remote control for
a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
Performing QUICK setup
Before using the system, you can make
the minimum basic adjustments in
QUICK setup.
1 Turn on your TV and select the
video input.
2 Press to turn on the system.
3 Press FUNCTION +/– repeatedly to
select “DVD/CD”, “USB 1”, or
“USB 2”.
The guide message [Press ENTER to
run QUICK SETUP.] appears at the
bottom of the TV screen.
4 Press without inserting a disc
or connecting a USB device.
[LANGUAGE SETUP] appears on the
TV screen. Displayed items may vary
depending on country or region.
5 Press / repeatedly to select a
language, then press .
[VIDEO SETUP] appears on the TV
screen.
6 Press / repeatedly to select
the setting that matches your TV
type, then press .
After [QUICK SETUP is complete.]
appears on the TV screen, the
system is ready for playback.
To change the setting manually
See “Using the Setup Menu” (page 26).
To quit QUICK setup
Press SETUP.
The guide message appears when you
turn on the system for the first time or
after performing “RESET” (page 52).
Notes
Inserting batteries
Notes
Note
Loading ...
Loading ...
Loading ...