Loading ...
Loading ...
Loading ...
32
OPERATING THE OVEN USING THE DISPLAY PANEL
PROOF
1. Select Top Oven or Bottom Oven from the Home screen. Remove
oven probe from oven to prevent damaging it.
2. Press Cook Modes on the Main Menu display. Figure 1
3. Press Proof on the Select Cook Mode screen. Figure 2
4. Press Set Temp on the Proof screen. Figure 3
5. Select one of the preset Proof temperatures and press Start*, or
press Other to enter a different temperature. Figure 4
6. If Other, enter your desired temperature, then Start. Figure 5
a. In Proof mode, the oven can operate at temperatures
between 80 and 200 degrees F. Entering a temperature
outside of this range will result in an error message.
7. The oven will begin preheating. Figure 6 See Attention below.
8. When the oven is preheated, an alarm sounds three times, then
once every 10 seconds. The Oven Ready screen appears. Figure 7
9. Place baking dish in the oven and select Start. The Proof screen
appears. Figure 8
10. At the end of the selected bake time, the Cooking Complete screen
is displayed. An alarm will signal twice and then once every 10
seconds until one of the following actions is taken. Figure 9
a. Select Off to turn off the oven and remove food.
b. Select Continue Cooking to return to the Proof screen.
Figure 3
c. Select Hold & Keep Warm to keep your food in the
oven at a specific temperature until you are ready to
serve.
11. If you select Hold & Keep Warm, press the Set Temp to display the
set temperature screen. Figure 10
Do not place food in the oven before or during the
preheating process. The oven uses a combination of
heating elements during the preheating process to
achieve the specified temperature.
Beware that the oven loses heat slowly and that
food will continue cooking in the Hold & Warm
mode.
Keeping the oven light on while baking will increase
the oven temperature approximately 15 degrees F.
*SET COOKING TIME
1. From the Proof screen, press Cook Time. Figure 3
2. Use the buttons on the touchpad to select desired cooking time, and
press Set. Figure 11
3. Return to the last screen displayed.
4. The cooking time countdown begins after the oven has preheated.
If the cooking timer is not set, the oven will continue
to operate at the selected temperature.
TEMPERATURE RANGE
In Proof mode, the oven can operate at temperatures between 80 and
200 degrees F. Entering a temperature outside of this range will result in
an error message.
Figure 1
Figure 2
Figure 3 - Proof
Figure 4 - Proof
Figure 5 - Proof
Figure 6
Figure 7
Figure 8 – Proof
Figure 9
Figure 10
Figure 11
ATTENTION
ATTENTION
Loading ...
Loading ...
Loading ...