Loading ...
Loading ...
Loading ...
English
25
Clock/Timer
Setting clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting
Refer to “Setting the RDS clock”.
Manual clock setting
1 In standby mode, press CLOCK on the remote
control.
➜ The hour digits start flashing.
2 Hold down or press ALBUM/PRESET +/-
on the set repeatedly to set the hours.
3 Press CLOCK again.
➜ The minute digits start flashing.
4 Hold down or press ALBUM/PRESET +/-
on the set repeatedly to set the minute.
5 Press CLOCK to confirm the time.
Setting the timer
The set can be used as an alarm clock, whereby
the selected source (DAB, FM, DISC or USB)
starts playback at a preset time. Make sure the
clock is set before using the timer.
1 Press and hold TIMER on the remote control.
➜ TIMER ON and the hour digits start flashing.
2 Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the hour.
3 Press TIMER to confirm.
➜ The minute digits start flashing.
4 Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the minute.
5 Press TIMER to confirm .
➜ TIMER OFF and the hour digits start
flashing.
6 Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the hour.
7 Press TIMER to confirm.
➜ The minute digits start flashing.
8 Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the minute.
9 Press TIMER again.
➜ The source mode now is available for
selection.
0 Hold down or press ALBUM/PRESET +/- on
the set repeatedly to select the wake-up source
(DAB, FM, DISC or USB).
Note:
– if you choose FM as the wake-up source, Hold
down or press ALBUM/PRESET +/- on the set
repeatedly to select a preset station.
! Hold down or press ALBUM/PRESET +/- on
the set repeatedly to set the wake-up volume.
" Press TIMER to confirm.
➜ The timer is now set and activated.
Note:
– The set will exit from the timer setting mode if
no button is pressed within 10 seconds.
Activating and deactivating
TIMER
● Press TIMER on the remote repeatedly to
activate or deactivate the timer.
➜ If deactivated, “TIMER OFF” appears.
Helpful hints:
The timer will not work at the set time if
– the timer is deactivated.
The set will switch to Tuner source automatically if :
– no CD is inserted when the selected source is
CD;
– no USB device is connected when the selected
source is USB.
P001-P029_MCB279_05_Eng 2008.5.8, 16:2325
Loading ...
Loading ...
Loading ...