Loading ...
Loading ...
Loading ...
English
13
Preparations
Connecting an additional
appliance
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the music stored on the external device
through the powerful speakers of Hi-Fi system.
1 Insert the USB device’s USB plug into the socket
on the front panel of the main set.
Or,
for the devices with USB cable:
a. Insert one plug of the USB cable (not
supplied) to the socket on the front
panel of the main set.
b. Insert the other plug of the USB cable to the
USB output terminal of the USB device.
Or,
for the memory card:
a. Insert the memory card into a card reader
(not supplied).
b. Use a USB cable (not supplied) to connect
the card reader to the socket .
on the front panel of the main set.
Connecting a non-USB device
Use a cinch cable to connect AUX-IN to the
analogue audio out terminals of an external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder).
Using AC power
1 Make sure all the connections have been made
before switching on the power supply
2 Connect the supplied AC/DC power adaptor to
the DC jack (located on the rear panel of the
main set) and to the wall socket. This switches on
the power supply.
To avoid damage to the set, use only the
adaptor supplied.
When the set is switched to standby mode, it is
still consuming some power. To disconnect the
system from the power supply completely,
remove the power plug from the wall
socket.
The type plate is located on the rear of the
set.
For users in the U.K.: please follow the
instructions on page 2.
Warning!
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
This product complies with the radio
interference requirements of the European
Community.
CAUTION
Visible and invisible laser radiation. If the
cover is open, do not look at the beam.
High voltage! Do not open. You run the risk
of getting an electric shock.
The machine does not contain any user-
serviceable parts.
Modification of the product could result in
hazardous radiation of EMC or other
unsafe operation.
P001-P029_MCB279_05_Eng 2008.5.8, 16:2313
Loading ...
Loading ...
Loading ...