Loading ...
Loading ...
Loading ...
9
Air quality below target
• Air quality below target
• Below target room
temperature
• Air quality below target
• Target room temperature
met
Air quality target met
• Air quality target met
• Target room temperature
met
Air quality improving
• Air quality target met
• Below target room
temperature
When auto mode is enabled (indicated by an A symbol in the bottom left corner of the display), the on-board sensors will intelligently
adjust the speed of the machine according to the air quality.
Auto mode
Auto purification in cooling mode
If the air is clean the A symbol will turn green and the numerical display will switch off. If the air quality worsens the A symbol will turn white and the
machine will automatically restart cleaning the room. While cleaning, the numerical display will show the airflow speed.
Selecting auto mode adjusts the airflow according to the air quality in the room.
For additional control the Dyson Link app can be used to further adjust the sensitivity of the machine.
A period of 6 days is required after the machine is first used for the sensor to calibrate. During this period the machine may be
more sensitive to VOCs (such as odors) than normal.
When auto mode is used while in heating mode, the machine is both purifying and heating the air. The machine will display the target
room temperature, not the fan airflow. Once the target room temperature has been reached, the machine will stop heating the air. If the
air quality target has not been met, the fan will continue to run in order to keep purifying the air. If the room temperature falls below the
target temperature, the machine will start to heat again.
Auto purification in heating mode
Loading ...
Loading ...
Loading ...