Loading ...
Loading ...
Loading ...
11
5 secs
This machine is hot when in use and for a
short period after use. Do not let bare skin
touch hot surfaces. If children are present,
consider positioning the machine out of
their reach.
Unplug from the main power source. If the machine has been in use, leave for 1 to 2
hours before cleaning to allow the machine to cool completely. Dust may accumulate
on the surface of the machine. Wipe dust from the loop, filter unit and other parts with
a dry or damp cloth when dust accumulates. Do not use detergents or polishes.
Clearing blockages
Caution: hot when in use
Cleaning
Unplug from the main power source. If the machine has been in use, leave for 1 to 2 hours in order to allow the machine to cool down completely.
Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush to remove debris.
To set the sleep timer, select the desired time. When time reaches
zero, the machine will go into standby mode. To cancel, increase
the time until two dashes appear.
Sleep timer Tilt function
Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
Loading ...
Loading ...
Loading ...