Loading ...
Loading ...
Loading ...
TwK-88 & TwK-D8 Installation Manual
Troubleshooting
Problem Possible Cause Possible Solution
Twk™ doesn’t
turn on
Faulty fuse
Remove fuse and check with continuity meter.
Replace if necessary.
Poor connection integrity
Check “Ground” and both “+12VDC” connections
for pinched wires; ensure tight connections.
Insucient “+12VDC
(Switched)” input
Make sure there is a sucient +12V supply at the
“+12VDC (Switched)” connection; if not, a relay
may be required.
Amps or processors
not turning on
Poor connection integrity
Check “Remote Out” connections for pinched
wires; ensure tight connections.
Low or no volume
Source unit/master
volume set too low
Increase source unit volume; increase
DRC-200 master volume control, if connected.
Loading ...
Loading ...