Loading ...
Loading ...
Loading ...
Cleaning and care
85
As soon as "Timer" is pressed, the
buzz
er and the flashing indicator will
turn off.
Delaying the start of the Self Clean
pr
ogram
T
o delay the start of the Self Clean
program, select Start Later.
Set the time you woul
d like the
program to start at.
Confirm with OK.
The door will lock automatically. The
star
t time set will appear in the display.
Start at appears in the display and the
star
t time set. The start or end time can
be changed up until the program is
ready to start, to do so select Change.
As soon as the start time has been
r
eached, the oven heating and the
cooling fan will turn on automatically.
The duration remaining will appear in
the display.
At the end of the Self Clean program
When the duration remaining reaches
00:00 h, a message will appear in the
display t
o tell you that the door is
unlocking.
When the door lock has been
deactivat
ed:
– Program Finished
appears in the
display,
– a buzzer will sound if turned on (see
"Settings - Buzz
er tones").
T
urn the oven off.
Acoustic and visual signals are turned
off.
Burn hazar
d!
Wait until the oven has cooled down
before removing any residual soiling
left in the oven compartment after
the Self Clean program.
W
ipe any residues (e.g., ash) left
behind after the Self Clean program
out of the oven compartment and off
of any accessories. The amount of
ash will vary depending on how dirty
the oven was.
Most soiling can be easily removed
using a clean, soft sponge and a mild
solu
tion of warm water and liquid dish
soap.
Depending on how dirty the oven was
prior to cleaning, there may be a
visible layer of soiling across the inner
glass pane on the door. This should
be removed using the scouring side of
a dish sponge, a glass scraper, or with
a stainless steel scrubbing pad and
liquid dish soap.
Loading ...
Loading ...
Loading ...