Loading ...
Loading ...
Loading ...
Installing the oven
102
The oven must no
t be operated
until it has been properly installed
within cabinetry.
The oven must have an adequate
supply of cool
air for proper
operation. The required air must not
be heated excessively by other heat
sources, e.g. wood burning stove.
Observe the following when
installing:
Build into cabinetry with no back
wall.
Make sure that the shelf that the
applianc
e sits on does not touch the
wall.
Do not install insulation strops on the
side walls of the cabinet housing.
Before installation
Before connecting the oven to the
power supply, first disconnect the
power supply from the oven isolator
switch.
Mounting the door handle
(depending on model)
Mount the handle onto the retaining
bolts.
Use the supplied Allen
wrench to
tighten all four bolts.
Installing the oven
Connect the power cord to the
electrical supply.
Do not carry the oven by the door
handle. The door can be damaged.
Use the handles on each side of the
ove
n to carry it.
It is recommended that you remove
the door befor
e installing the
appliance (see "Cleaning and Care -
Removing the door") and all oven
accessories from the cavity. This will
make for easier installation into the
niche and will not tempt you to use
the handle to carry it.
If ther
e are side handles, please
remove them.
P
ush the oven into the cabinetry and
align it.
Open the door (if it
was not removed
previously).
Loading ...
Loading ...
Loading ...