AR09KSFTAWQNSA User Manual

Loading ...

English-46

Installing and connecting the drain hose of the indoor unit

Wheninstallingthedrainhosefortheindoorunit,checkifcondensationdrainingisadequate.

Whenpassingthedrainhosethroughthe65mmholedrilledinthewall,checkthefollowings:

Drain hose installation

1. If necessary, connect the 2 meter extension drain hose to the drain hose.

2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.

3. Fit the drain hose into 1 of 2 drain hose holes, then x the end of the drain hose tightly with a clamp.

4. WhenextendingtheDrainHose,holdtheendofDrainHoseandExtended

Hose, rotate and insert the drain hose into Extended hose for 40~45 mm.

Make sure the two hoses are rmly connected, there is no water leakage.

5. Connect the Drain Hose after using Foam Insulation to wrap the Extended Hose. Then, Use vinyl tape to wrap the

each side of connection by 20 mm .

• Ifyoudonotusetheotherdrainhosehole,

block it with a rubber stopper.

•

Don’t tie drain hose to the assembly pipe which may lead to water leakage.

• Ifthediameteroftheconnectionhoseissmallerthantheproduct'sdrainhose,waterleakagemayoccur.

Wall

Indoor unit

Drain hose

The drain hose must NOT

slant upwards.

The end of the drain hose

must NOT be placed under

water.

The drain hose must not

be bent.

Keep a clearance of at least

5cm between the end of the

drain hose and the ground.

5cm

less

Do not place the end of the

drain hose in a hollow.

Ditch

Aftercompletingthe

installation of the drain

hose, pour water into

the drain pan to check

whether the hose is well

drained.

1) Correct connection

Pipe

Drain hose

2) Incorrect connection

Pipe

Drain hose

Drain hose hole

Loading ...

User Manual - Page 46