AR09KSFTAWQNSA User Manual

Loading ...

English-26

Settings

Using the Auto clean function

Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with

clean air.

When the air conditioner is operating;

Indoor unit display

1. Press the Settings button.

2. Press the , or Settings button until (Clean) indicator starts to blink.

3. Press the SET button to set the Auto clean function.

- 3 seconds after setting Auto clean function, (Clean) indicator on the remote

controller display will disappear and Auto clean ( ) and Timer ( ) indicator

will turn on the indoor unit display. Auto clean function will be activated after

the air conditioner stops operating.

- DurationoftheAutocleanfunctioncanbedierentdependingontheprevious

operation mode used.

Auto(cool),Cool,Drymode:30minutes.

Auto(heat),Heat,Fanmode:15minutes.

Cancel

 Press the Settings button  Press the , or Settings button to

make the (Clean) indicator blink and press the SET button.

• WhentheoperationmodeissetduringAutocleanfunctionisactivated,

theairconditionerwilloperateinchosenoperationmodeandtheAuto

clean function will be re-activated when the operation stops.

• During the auto clean function, indoor fan will continue to run and air

ow blade will remain open to expel ambient air.

Checking the power consumption

This function is displayed on the indoor unit display but not supported in 30 model.

This function will display the amount of electricity consumed by operating the air conditioner.

When the air conditioner is operating;

Indoor unit display

1. Press the Settings button.

2. Press the , or Settings button until (Usage) indicator starts to blink.

3. Press the SET button to check the power consumption.

- 3secondsaftersettingpowerconsumptioncheckingfunction,(Usage)indicator

on the remote controller will disappear.

- Indoor unit will display the amount of Power consumption for few seconds and

then return to usual status by displaying the set indoor temperature.

- Power consumption will be calculated from the moment the air conditioner is

turned on and calculated value will be reset when the air conditioner turns o.

- 1 is the default value of the electricity consumption and 99 is the maximum value.

UnitisinkWh.

• Whentheairconditionerisnotoperating,powerconsumptionwillnot

be displayed on the indoor unit display.

Loading ...

User Manual - Page 26