Loading ...
Loading ...
Loading ...
ENGLISH-9
01 PREPARATION
Check before use
Installation status
Ensure that the following installation requirements have been satised.
The product should be installed on an even, level floor.
There should be no objects blocking the air intake and outlet.
The installation site should be dry and there should be no inflammable substances around it.
The product should be installed at least 5 cm (15 cm is recommended) from the wall.
Before using the product for the first time and when replacing the 2-in-1 filter, make sure to remove the plastic packaging
of the filter.
Power plug and power outlet
Be sure to use a dedicated 220 -240V electrical outlet. (When the power is applied, the product enters the standby state.)
Unplug the power plug if it will not be used for a long period of time.
General information about the product
Be sure to install the lters before using the product and replace the lters when they start emitting a strange odor.
This product is highly efficient for deodorizing household odors such as ammonia, as well as formaldehyde (the main
cause of sick building syndrome), VOCs etc. However, deodorization function of the air purifier is effective when air is
penetrates through the filter. Therefore when there’s excessive odor in your room, ventilate the room first and use the air
purifier afterwards to eliminate remaining odors for more effective deodorization.
If you operate the air purifier without the filters, you cannot expect any air purification effect.
If the filters are contaminated, the air purification performance will be degraded. If the filters are seriously dirty or emit a
bad odor or the airflow from the product decreases significantly, replace the filters.
Avoid operating the air purication system when cooking food that generates a strong odor such as sh.
Otherwise, the lifetime of the deodorization filter may be significantly decreased and the deodorization filter may become
contaminated by the odor.
When the 2-in-1 filter, is contaminated by surrounding odors and the odors can be smelt when the air purification filter
operates, please replace the filter as it has reached its end of life.
Please close the windows and doors when operating the product.
Otherwise, the air purification performance is degraded.
The main noxious gas that cannot be removed: Carbon monoxide (CO)
Concentration level of carbon dioxide may increase if you operate the product for a long time with windows closed.
Therefore, ventilate the room regularly between use. When filter is saturated with just a weak odor, ventilating the room
will help get rid of saturated odor.
Loading ...
Loading ...
Loading ...