Loading ...
Loading ...
Loading ...
ENGLISH-10
Check before use
Using the lters
▶ Before you use the product for the rst time, remove the plastic packaging from the 2-in-1 lter.
▶ If you operate the air purifier without the filters, you cannot expect any air purification effect.
▶ If the filter clean/replacement indicator (
sec
) blinks, replace the 2-in-1 filter.
(The 2-in-1 filter removes fine, invisible particles, gas and odor particles from the air. Postponing the filter clean/
replacement on the basis of a visual evaluation is not a desirable plan. The filter clean/replacement cycle is the maximum
usage period of the filter. The actual clean/replacement cycle may vary depending on the operating environment.)
▶ If a strange odor is coming from the product, the airflow from the product becomes weak or the recommended clean/
replacement cycle is reached, make sure to replace the 2-in-1 filter.
▶ Cleaning the Pre filter frequently improves the performance of the air purifier and helps keep the indoor air clean.
▶ For the installation order and how to install the filters, refer to the Inserting the filters section in the Cleaning and
Maintenance chapter.
▶ Before replacing the filters, make sure to turn off the power.
Removing the back cover of the product
Hold the left and right edges of the back cover, pull it forward
slightly (①) and then lift it up (②) to separate it.
Dust sensor
Gas sensor
①
②
Mounting the back cover of the product
Insert the hooks of the back cover into the
grooves at the bottom of the main body (①)
and press the edges of the back cover so that it
fits into 8 holes (②) of the main body.
If the hooks of the back cover is not
properly locked into the grooves, back
cover can not be assembled properly.
①
②
Back
cover
Specications
Model AX40T3020WU/SA
Dimensions
(Width × Height × Depth)
361 mm x 481 mm x 233 mm
Standard capacity 39 m
2
The design and specifications of the product are subject to change without notice for product improvement purposes.
Loading ...
Loading ...
Loading ...