Loading ...
Wireless, Battery-Powered, Single and/or Multiple Station (24 devices maximum,
see section 3) Ionization Smoke Alarm with Smart HUSH
®
Control to temporarily
silence nuisance alarms.
This alarm detects products of combustion using the ionization technique. It
contains 0.9 microcurie of Americium 241, a radioactive material (see section 9).
Distributed under U.S. NRC License No. 32-23858-01E. Manufactured in compli-
ance with U.S. NRC safety criteria in 10 CFR 32.27. The purchaser is exempt
from any regulatory requirements. Do not try to repair the smoke alarm your-
self. Refer to the instructions in Section 13 for service.
WARNING! Ionization sensing alarms may detect invisible fire parti-
cles (associated with fast flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible fire par
ticles
(associated with slow smoldering fires) sooner than ionization
alarms. Home fires develop in different ways and are often unpre-
dictable. For maximum protection, Kidde recommends that both
Ionization and Photoelectric alarms be installed.
WARNING! REMOVAL OF THE SMOKE ALARM BATTERIES WILL REN-
DER THE SMOKE ALARM INOPERATIVE.
IMPORTANT! READ ALL INSTRUCTIONS BEFORE INSTALLATION AND KEEP
THIS USER’S GUIDE NEAR THE ALARM FOR FUTURE REFERENCE.
This alarm is interconnect compatible with the following alarms and accessories:
• Smoke alarms: RF-SM-ACDC, and RF-SM-DC
• Smoke Sounder: RF-SND (not a UL certified accessory)
See User’
s Guides for specific application information.
CONTENTS OF THIS USER’S GUIDE
1 RECOMMENDED LOCATIONS FOR SMOKE ALARMS
2 LOCATIONS TO AVOID
3 INSTALLATION INSTRUCTIONS
4 OPERATION AND TESTING
5 NUISANCE ALARMS
6 MAINTENANCE
7 LIMITATIONS OF SMOKE ALARMS
8 GOOD SAFETY HABITS
9 NRC INFORMATION
10 NFPA PROTECTION STANDARD 72
11 CALIFORNIA STATE FIRE MARSHAL REQUIRED INFORMATION
12 TROUBLE SHOOTING GUIDE
13 SERVICE AND WARRANTY
Loading ...
Loading ...
Loading ...