Loading ...
Loading ...
Loading ...
LED Indicator Operation
Red LED:
The red LED will flash in conjunction with the alarm beep. Therefore, the red
LED will flash during a smoke alarm, a low battery mode chirp and a unit error
mode chirp.
Green LED:
The green LED will illuminate as described below under the following conditions:
STANDBY CONDITION - The LED will flash approximately every 10 seconds.
INITIATING ALARM INDICATOR The LED will flash every second while
sounding an alarm to signify that the alarm sensed a smoke hazard. This
will only be displayed on the alarms that sensed smoke. The remaining
interconnected alarm(s) will sound but will not display the initiating indica-
tor. The initiating indicator varies from model to model. See the user’s
guide for each specific model of interconnected alarm for a description of
the initiating alarm indicator.
ALARM MEMORY CONDITION - The LED will flash every second signifying
that the alarm sensed a smoke hazard. It will continue to flash every sec-
ond until the test/reset button is pressed, thus resetting the alarm.
HUSH
®
MODE CONDITION - The LED will flash every 2 seconds while the
alarm is in HUSH
®
mode.
TESTING
TEST THE ALARM WEEKLY TO ENSURE PROPER OPERA
TION.
When testing, ensure that all units activate in response to a push to test from
another unit. This will verify that changes in your environment (i.e. moved furni-
ture, addition of electronic appliances) have not adversely effected the operation
of your wireless system.
Remote Push To Test: Test your Kidde Wireless alarm system by activating the test
button on any Kidde Wireless alarm for a minimum of 5 seconds, or until all of
the interconnected alarms sound. When the other alarms respond, this verifies
that both the alarms and the interconnect system are functioning properly.
It may take up to 12 seconds for your Wireless interconnected alarms to
enter alarm mode in response to a remote push to test.
If the alarm does not sound, the unit may have defective batteries or other fail-
ure and you should call Kidde customer service at 1-800-880-6788. If other
interconnected alarms do not produce an alarm signal check the fuse or circuit
Loading ...
Loading ...
Loading ...