Loading ...
Loading ...
Loading ...
16
NOTE: When you remove the water tank, do not touch sensors or any parts which are
situated behind tank. Doing so may damage the product. Be sure to push the tank
gently all the way into the unit. Banging the bucket against anything or failing to push
it in securely into place may cause the unit not to operate.
Do not remove any parts from the water tank or tank enclosure. The water full sensor
will no longer be able to detect the water level correctly and water may leak from the
water tank.
2. CONTINUOUS DRAINAGE
Water can be automatically plumbed in or drained into a sink, a larger recipient or
through the wall into an outside drain by attaching a pipe to the unit (10 mm internal
diameter) (not included). Insert the pipe into the drain outlet at the back of the unit as
shown here.
Make sure the connection between pipe and the drain outlet is tight and does not leak.
Then direct the pipe to a suitable drainage point. This unit uses gravity to dispose of
water hence the drain should be lower than the water outlet on the unit. Put the tank
back. Be sure to run the water pipe downward and let the water to flow out smoothly.
Do not kink or bend the pipe.
The permanent drain can be used in conjunction with a water pump (e.g. when draining
from a cellar) to lift the water upwards.
CARE AND MAINTENANCE
Always shut off the unit and unplug from the mains before cleaning or performing any
maintenance. When it is not in use for long periods it is advisable to remove the plug
from the power socket. Do not use chemical solvents (such as benzene, alcohol or
gasoline) as they may cause irreversible damage to the unit.
1. CLEAN THE GRILLE AND CASE Use water and a mild
detergent to clean the washable mesh filters. Do not use bleach or
abrasives. Do not splash water directly onto the main unit. Doing
so may cause an electrical shock and can
lead to the insulation to deteriorate, or
cause the unit to rust. The air intake and
outlet grilles get soiled easily, so use a
vacuum attachment or soft brush to clean. Wipe the
dehumidifier body with a soft damp cloth or kitchen towel.
Remove the ABS filter frame. If the optional carbon filters are fitted, remove them from
the frame and hoover gently approximately every 2-3 weeks.
If the mesh filter is dirty hoover it, if it is heavily soiled wash it with warm soapy water
and dry thoroughly before reinserting it in the unit.
When filter cleaning is finished and filters are dry placed them back into the unit.
Loading ...
Loading ...
Loading ...