Loading ...
Loading ...
Loading ...
11
`
TIMER
Press the TIMER button to program the timer. When the timer is
activated, the "TIMER" light will illuminate. Before programming the
timer, ensure the timer function has not been activated (the light must
be off). The following timer programs are available.
DELAYED POWER-ON FUNCTION: With the appliance in standby,
press the TIMER button, then use the UP and DOWN buttons to set
in how many hours’ time you require the unit to start (0~24 hours).
DELAYED POWER-OFF FUNCTION: While the appliance is
running with the desired settings, press the TIMER button, then use
the UP and DOWN buttons to set in how many hours’ time you
require the unit to stop (0~24 hours).
INTELLIGENT DEFROST
The appliance will defrost automatically when the coil sensor detects
that the internal temperature is too low. During defrosting the
indicator will light up. Once the defrost cycle has finished, the
appliance will return to the mode that was previously operating.
TANK-FULL
When the water tank is full, the TANK FULL indicator light will flash,
and the unit will stop operating. One emptied and replaced, the
appliance will resume operation.
OPTIONAL CARBON FILTER (Air purification function)
Remove the carbon filter from the bag and insert it on the filter
housing. It is suggested to hoover the carbon filter every 2-3 weeks
and change it every 3-6 months as this will help to ensure the room is
kept fresh and odour free.
HUMIDITY LEVEL & TIMER 2 DIGIT DISPLAY
The led indicator performs the following functions:
1 When the unit is plugged in, it will indicate the humidity level of
the room.
2 When the UP and DOWN buttons are pressed, it will indicate
the desired humidity currently set.
3 When the timer is programmed will show the duration.
NOTES: When humidity level is outside the normal operational parameters will show
LO/HI. If ambient humidity is lower than 20%, it will show “LO” If ambient humidity is
higher than 90%, it will show “HI”.
Loading ...
Loading ...
Loading ...