Loading ...
Loading ...
Loading ...
10
POWER
Turn the appliance on/off
MODE Button
Select the function of the unit between SMART / HIGH / LOW / and
FAN. The LED’s next to the button will show which mode is selected.
SMART MODE: The unit will default to SMART mode the first time it is
switched on and remains in this mode until another program is chosen.
In smart mode, it will aim for a relative humidity of 50-55%, and the fan
speed will be adjusted automatically.
HIGH: The unit will dehumidify and aim for the humidity set using the
up and down buttons.
LOW: The unit will dehumidify and aim for the humidity set using the
up and down buttons.
AIR Purifier: Only the fan will run and water is not extracted. The
activated carbon filter will remove odour
HUMIDITY INDICATOR MODE
When the appliance is first started the indicator light will turn on
automatically. The colour of the indicator light will change according to
the humidity condition of the room it is situated in.
RED: High humidity, RH≥70%
ORANGE: Comfortable, 70%> RH ≥60%
GREEN: Dry, RH<60%
Press the “Humidity Indicator light” button to turn the light on/off.
NOTE: It can take around 2 minutes following a change in the humidity
for the indicator to change colour, e.g. If the humidity drops to 55% it
may take 2 minutes before the indicator changes to green.
OSC. (Oscillation function)
There are three different options for the outer louvre on the unit. It
can be set at 45 or 90 degrees, or alternatively to swing. Use the
dehumidifier at a 45-degree angle or with the swing function for
Laundry mode
HUMIDITY SETTING
Press the UP and DOWN buttons to select the desired relative
humidity level. The default relative humidity is 55%. When a relative
humidity of 35% is selected, the compressor will not stop until the
water tank is full.
NOTE: The desired humidity cannot be changed in SMART mode.
Loading ...
Loading ...
Loading ...