Garland MPGS20S User Manual

Loading ...

Part # MPSM07 (03/24/08)Page 28

When programming a recipe key, the display will prompt for the fan

speed for the prole being programmed. The user scrolls through the

list of choices and presses the Enter key to store the selection. The

prole number is shown in the lower left corner of the display.

When programming a recipe key, the display will prompt for the cook

temperature for the prole being programmed. The prole number is

shown in the lower left corner of the display.

When programming a recipe key, the display will prompt for the cook

time for the prole being programmed. The time is entered in hours,

minutes and seconds. The prole number is shown in the lower left

corner of the display.

Each prole may have Moisture, but it will only operate during

proles when it is actually programmed. Press the “SCROLL” key to

step through the list of choices. Press the Enter key to store your

selection.

Product Keys have six proles that can be programmed dierently.

Once all the steps in a prole are completed the program will prompt

to continue to the next prole or to exit. Press the “Y” key to go to the

next prole. Press the “N” key to nish programming this key.

When you have programmed all the proles needed for the recipe,

the last step is to indicate if you want to go into hold mode at the

end of the cooking cycle. If you choose yes you will then be asked

to program a hold temperature. If you choose no you will have the

opportunity to program another key or to exit.

When cooking with a product key, the display will show the

programmed temperature for the oven, the actual temperature for

the oven, the amount of time left during the recipe in progress. The

word “PRF1” in the center of the lower row indicates the mode the

oven is in. The word “HEAT” in the lower right hand corner will cycle

on and o with the burners/elements.

When cooking with a shelf timer, you will be prompted to enter the

number of the oven shelf (1-6) that you are putting the product on.

When cooking with a shelf timer, the display will show the

programmed temperature, the actual temperature, the amount of

time left in the currently running timer. The word “SHFx” in the center

of the lower row indicates the active shelf timer. The word “HEAT” in

the lower right hand corner will cycle on and o with the burners/

elements.

When a cooking cycle ends the display clears, the blinking message

DONE is displayed and the audible alarm sounds.

Loading ...

Garland MPGS20S MP-GS-20-S 38" Moisture+ Full-Size Convection Double Oven with 160000 BTU Total Power, Solid State Controller, Two Speed Fan with 3/4 HP Fan Motor and Quartz Illumination in