Loading ...
Loading ...
Loading ...
VIZIO L30 WGUe User Guide
Version - 4/7/2005
23
3.3 - Preparing the LCD for Wall Mounting
The VIZIO L30 WGUe can either be kept on the base stand or mounted to the wall for viewing. If
you choose to mount the L30 WGUe to the wall, please follow the instructions below for removing
the base stand.
To remove the stand base:
1. Unplug all the cables and cords from the LCD TV.
2. Place the LCD TV face down on a soft and flat
surface (blanket, foam, cloth, etc) to prevent any
damage to the display.
3. Remove the 6 screws on the stand base of the LCD
TV.
4. Remove the glass and stand safely from the back panel.
Now, the LCD TV will fit flush against a LCD TV wall mount. Please make sure to read the
directions of your specific wall mount to properly hang the L30 WGUe.
3.4 - Adjusting Basic LCD TV Settings
Volume
To increase the volume, press and hold the VOL + button on the front panel or remote
control until the desired level is reached.
To decrease the volume, press and hold the - VOL button on the front panel or remote
control until the desired level is reached.
TV Channels
To step up through the available TV channels, press the CH + button on the front panel
or remote control once for the next channel or hold it depressed until the desired channel
is reached.
To step down through the available TV channels, press the - CH button on the front panel
or remote control once for the previous channel or hold it depressed until the desired
channel is reached.
Wide
Using this feature you can watch video content in Panoramic, Widescreen, Zoom or
Standard mode. Press the WIDE button on the remote control to switch among the
modes.
Note: Please make sure you secure the base of
the stand so that the glass does not fall when the
screws are loosened.
Loading ...
Loading ...
Loading ...