Loading ...
Loading ...
Loading ...
Symbols on the inverter
The inverter is attached with some labels related to operation safety. Please
don’t install the device before carefully reading through and fully
understanding these labels.
It means there is still residual voltage in the inverter! The
capacitor is still electrified after the AC/DC side of the inverter is
cut off, so the inverter cannot be maintained within 10min till the
capacitor is completely discharged.
10 min
Earth line!
Acceptable in the test of insulation and voltage resistance.
Acceptable in the function test.
Acceptable in the quality inspection.
Danger of high voltage and electric shock!
Danger of high temperature and burn injury!
The wasted product must be sent to the authorized collecting
center.
Please carefully read through and fully understand the
instruction manual before using the product.
Contents
1 Safety instruction……………………………………………………………………1
1.1 Before installation…………………………………………………………… 1
1.2 During installation…………………………………………………………… 2
1.3 Operation………………… …………………………………………………2
1.4 Repair………………………………………………………………………… 2
1.5 EMC…………………………………….........……………………………… 3
2 Product description………………………………………………………………4
2.1 Product applicability………………………………………………………… 4
2.2 Circuit structure……………………………………………………………… 4
2.3 Product introduction…………………………………………………………
5
2.3.1 Electrical connecting part………………………….....………………5
2.3.2 Dimensions and weight ……………………………………………… 6
2.3.3 LCD Displaying panel………………………………………………… 6
2.3.4 Product label ………………………………………………………… 7
3 Installation…………………………………………………………………… …… 8
3.1 Safety instruction…………………………………………………………… 8
3.2 Installation procedures……………………………………………………… 8
3.3 Preparation before installation………………………………………… 9
3.3.1 Unpacking and checking……………………………………………… 9
3.3.2 Preparation for tools………………………………………………… 10
3.4 Selection for installation position………………………………………10
3.5 Inverter……………………………………………………………………….12
3.5.1 Installation on a wall………………………………………………12
Introduction Contents
Loading ...
Loading ...
Loading ...