Loading ...
Loading ...
Loading ...
Cleaning and Care
Cleaning and Care
17
Troubleshooting
Troubleshooting
If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out
some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before
calling for service.
Warning! Do not try to repair the appliance yourself . If the problem persists after you have made the checks mentioned below,
contact a qualified electrician, authorized service engineer or the shop where you purchased the product.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door.
Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning .
Caution! Only after the door seals are completely dry should the appliance be powered on.
Replacing the LED light
Warning: The LED light must not be replaced by the user! If the LED light is damaged, consult a qualified, registered electrician
for assistance .
Problem Possible cause and solution
Appliance is not working correctly
Odours from the compartments
Check whether the power cord is plugged into the power outlet properly.
Check the fuse or circuit of your power supply, replace if necessary.
The ambient temperature is too low. Try setting the chamber temperature to a colder
level to solve this problem. It is normal that the freezer is not operating during the
automatic defrost cycle, or for a short time after the appliance is switched on to
protect the compressor.
The interior may need to be cleaned
Some food, containers or wrapping cause odours.
Noise from the appliance
The sounds below are quite normal:
• Compressor running noises.
• Air movement noise from the small fan motor in the freezer compartment or
other compartments.
• Gurgling sound similar to water boiling.
• Popping noise during automatic defrosting.
Loading ...
Loading ...
Loading ...