Loading ...
Loading ...
Loading ...
31
EN
INSTALLATION
Safety instructions for installation
Do not modify this appliance.
This appliance must be installed by an authorised technician or installer.
Prior to installation, ensure that the local distribution conditions (nature of the gas
and gas pressure) and the adjustment of the appliance are compatible.
The adjustment conditions for this appliance are stated on the label (or data
plate).
This appliance is not connected to a combustion products evacuation installation
regulations. Particular attention shou ld be giv en to the relevant requirements
regarding ventilaton.
Before installing, turn off the gas and electricity supply to the appliance.
All appliances containing any electrical components must be earthed.
Ensure that the gas pipe and electrical cable are installed in such a way that they
do not touch any parts of the appliance which may become hot.
Gas pipe or connector shouldn’t be bent or blocked by any other appliances.
Check the dimensions of the appliance as well as the dimensions of the gap to be
cut in the kitchen unit.
The panels located above the work surface, directly next to the appliance, must
be made of non-ammable material. Both the stratied surfacing and the glue
used to secure it should be heat resistant, to prevent deterioration.
Turn on appliance tap and light each burners.
Check for a clear blue ame without yellow tipping.
If burners shows any abnormalities check the following :
- Burner lid on correctly
- Flame spreader positioned correctly
- Burner vertically aligned with injector nipple
A full operational test and a test for possible leakages must be carried out by the
tter after installation.
The exible hose shall be tted in such a way that it cannot come into contact
with a moveable part of the housing unit and does not pass through any space
susceptible of becoming congested.device. It should be installed and connected
in accordance with current.
Grease cranes produced at the factory to meet the requirement of all life hob.
Loading ...
Loading ...
Loading ...