Loading ...
Loading ...
Loading ...
13
2 Put on the 3D glasses.
Precautions for use
Misoperation may occur if:
• The viewing position is too far from the projector
• There are other communication devices, such as a
wireless LAN (IEEE802.11 b/g/n) or a microwave with
a bandwidth of 2.4 GHz, near the unit
3D glasses communication range
The following figure indicates the communication range of
the 3D glasses. If you try to watch 3D video images from
a distance greater than the communication range or install
the unit outside the communication range, the 3D glasses
may not be able to display the images properly. Also, the
distance varies depending on the environment of the room
and installation environment of the unit.
Top or side view
Using the Picture
Position
You can store up to five combinations of lens settings
(focus, picture size, picture position), aspect ratio, and
blanking. These settings can be recalled.
1 Press POSITION.
The Picture Position selecting palette is displayed.
2 Press POSITION repeatedly, or press M/m/ to
select the position.
The settings of the position selected is recalled.
Store or delete lens settings (focus, picture size,
picture position) in the “Picture Position” of the
Screen menu (page 24).
Adjust the aspect ratio or blanking in the “Aspect”
(page 25) or “Blanking” (page 25) of the Screen
menu.
The position where the lens settings are not stored is
displayed as “---.”
Projector
10 m 10 m
10 m
10 m
Loading ...
Loading ...
Loading ...