Loading ...
Loading ...
Loading ...
INTERNAL LAYOUT
FRESHZONE, LOW TEMP DRAWERS
The FreshZone drawer is held to the slide guides by a thumbscrew on
each side. Release the thumbscrews to remove the drawer.
To remove the inner drawer unscrew and remove its thumbscrews.
When replacing the drawer, make certain the back of the drawer
engages under the clips on the slide guides. Once the drawer is
properly in position, reinstall the thumb screws as they are necessary
to keep the drawer in place.
ICE TRAY
The ice tray is located in the upper drawer of the freezer
compartment.
After removal, make sure to reposition it correctly - small protrusions
from the bottom of the ice bin should align with holes in the upper
freezer drawer.
Do not place hands or fingers near the ice maker when it is functioning.
ADJUSTABLE SHELVES
It is recommended that the shelves be emptied prior to adjusting
the position. The shelves are able to slide up and down and can
be easily re-positioned by the user as follows:
1) Slightly loosen the small locking knob (located under the
shelf on the left side at the back) by turning it counter-
clockwise.
2) Support the back of the shelf and tilt it upward at the front.
This will allow you to raise or lower the shelf to the desired
position.
3) Once in position, lower the front of the shelf and tighten the locking knob.
• The locking knob keeps the shelf locked safely in position. If the locking knob is loose, the
shelf could slide down if it were raised or tilted upward at the front.
To remove a shelf:
1) Remove the top cap of the left and right side ladder
2) Tilting the front of the shelf upward, slide the shelf to the top to remove.
• It is not necessary to remove the shelves for cleaning.
©2019 Hestan Commercial Corporation
21
EN
Loading ...
Loading ...
Loading ...