Loading ...
Loading ...
Loading ...
d. Flip the cart over so it is standing upright.
e. Note that the lower shelf has slots on the sides for the screws to slide into. Slide the
lower shelf in from the cart front on an angle, above the screws. Carefully seat the
shelf onto the screws. You may need to push or pull gently on one or more legs to
get the shelf to seat fully into place.
f. Using the ball end of the allen wrench, tighten the screws initially snug against the shelf
for all four screws. Then use the opposite end of the wrench to completely tighten the
screws. Use caution while tightening to avoid slipping of the hand onto adjacent sheet
metal edges.
Step 5- Clean and Polish your new Grill Cart
a. Using a multi-purpose spray cleaner and towels, remove adhesive traces and dust from
the grill cart surfaces.
b. Locate the Stainless Steel Cleaner Polish supplied. Polish the stainless steel surfaces,
applying the polish with a towel a small amount at a time. Rub in the direction of the
grain marks only. Continue rubbing all traces of the polish off, leaving a brilliant shine.
c. Locate the cutting board and wash with warm soap and water. Allow to dry.
Step 6- Grill and Cutting Board Installation
a. Place your KENYON All Seasons grill into the cart top toward the side without the
wheels, routing the GFCI electrical cord through the cart top opening and out toward the
rearofthecart.Refertogure1.Maintainthegrilllocationtothesideofthecart
without wheels so that the cart will be stable during movement.
b. Place the cutting board into the cart top cavity, alongside the grill.
c. ENJOY!
Note- Store this manual, extra screw and the allen wrench within the large bag, in a safe place
for easy reference for future disassembly and reassembly.
8
Loading ...
Loading ...