Loading ...
Loading ...
Loading ...
Lynx Side Burners & Grill Extender
30
MOUNTING THE SIDE BURNER / GRILL EXTENDER TO A CART (continued)
7b. When mounting the ProSear Grill Extender (LPSGE) or Side Burner (LSB1 / LSB2)
to a 27" or 36" freestanding grill the plumbing must thread through the hole second from the rear
of the cabinet. Use the hole cover included with LPSGEBKT to cap the hole closest to rear of
cabinet.
Important Note: Make certain that the flex line is not bound, kinked or pinched before
proceeding.
8.Be certain that the outer flange of the ProSear Grill Extender (LPSGE) or Side Burner (LSB1 /
LSB2) is overhanging the cabinet and that the screw holes are properly aligned on all sides.
9.Insert (3) ¼ -20 screws into the outer flange on the side that does not receive the mounting
bracket (opposite the plumbing outlet) and (1) ¼ -20 screw into the rear outer flange to secure
to the cabinet to the chassis.
10.Locate the "cart-mounting bracket" (Note: 27" and 36" grills require an alternate bracket /
LPSGEBKT for mounting) and align the (5) screw holes on bracket with the (5) screw holes on
side of cabinet. Secure the bracket to the cabinet and chassis with (5) ¼ -20 screws. Leave all
screws loose but snug until proper alignment is achieved.
11.REQUIRED FOR SIDE BURNER CART MOUNTING ONLY - Locate lower stabilizing bracket
(labeled 'Side Burner Only') and place into position show in step #5 of Side Burner diagram.
Make certain that upper flange of stabilizing bracket is positioned inside (above) bottom rail of
Side Burner. Secure with (4) ¼ - 20 screws
12.Tighten all remaining screws
.
Loading ...
Loading ...
Loading ...