Loading ...
Loading ...
Loading ...
Lynx Side Burners & Grill Extender
29
1.Remove the components and hardware for Cart Mount Adaptor Kit (LPSGEKIT) from carton.
Contents include the following:
· Adaptor cabinet (3 sided)
· Rear panel
· Cart-mounting bracket (27" and 36" applications required alternate bracket / LPSGE
BKT)
· ¼ - 20 screws (x11) - Note: 4 additional screws provided for Side Burner (LSB1 & LSB2)
cart mounting. See item 11 below.
· Flex-line kit
Important Note: When mounting the ProSear Grill Extender (LPSGE) or Side Burner
(LSB1 or LSB2) and Cart-Mount Adaptor Kit (LPSGEKIT) to a 27" or 36" Freestanding
Grill a Cart-Mount Bracket (LPSGEBKT) is required.
2.Place adaptor cabinet on a level workstation with the open side of the cabinet facing up and
welded side-shelf brackets on your right-hand side.
3.Locate the "rear panel' and slide into position on the rear of the cabinet. (When the welded
side-shelf brackets are on your right-hand side, the rear of the cabinet is farthest from you.)
4.Attach the rear panel to the cabinet by inserting (2) ¼-20 screws into the (2) slots located in
the lower portion of the rear panel and threading them into the weld-nuts on the cabinet. Be
certain the rear panel is secured to cabinet before proceeding.
5.Locate "flex line".
6.Secure the flex line fitting to the manifold and position the elbow in the direction of the connec-
tion that will be made at the grill. (See Gas Hook-Up diagram)
Important Note: Use threading compound to make this connection. Threading com-
pound must be LP resistant.
7.Lower the ProSear Grill Extender (LPSGE) or Side Burner (LSB1 / LSB2) chassis into the cab-
inet and carefully thread flex line through the rear opening of the cabinet. (See flex-line passage
in diagram)
7a. When mounting the ProSear Grill Extender (LPSGE) or Side Burner (LSB1 / LSB2)
to a 30", 42" or 54" freestanding grill the plumbing must thread through the hole closest to the
rear of the cabinet.
MOUNTING THE SIDE BURNER / GRILL EXTENDER TO A CART
Rev. 04/2005
Loading ...
Loading ...
Loading ...