Loading ...
Loading ...
Loading ...
22
Appliance Installation/Operation
2-Level Task Light
• Press once for LOW setting. Top of icon will illuminate.
• Press 2x for HIGH setting. Top and bottom of icon will
illuminate.
• Press 3x to turn task light OFF.
4-Speed Fan Speed Control
• Press once for LOW setting. Top-right quadrant of icon will
illuminate.
• Press 2x for MEDIUM LOW setting. Top-right and bottom-right
quadrants of icon will illuminate.
• Press 3x for MEDIUM HIGH setting. Top-right, bottom-right, and
bottom-left quadrants of icon will illuminate.
• Press 4x for HIGH setting. All quadrants of icon will illuminate.
• Press 5x to turn fan OFF.
10-Minute Delay Off
When fan is ON at any speed setting, press delay-off icon to start
10-minute timer. Fan and icon will shut off after 10 minutes.
To reset or deactivate delay-off, press icon again.
30-Hour Filter Clean Reminder
• After 30 hours of blower “ON” time, fi lter clean icon will blink
continuously.
• To reset, touch and hold icon for 2 or more seconds. Indicator
will turn off.
Down / Retract Chimney
• To retract chimney, touch down button. Any feature that is
active will shut off.
Up Button
• Touch up button on right trim to raise chimney. All functions will
return to their previous settings.
Heat Sentry
• When the operating temperature is too high, the fan speed will
increase to its highest setting to protect sensitive components.
The fan icon will blink and cannot be overridden until the
temperature reaches an acceptable level. The fan speed will
return to the previous setting and the icon will stop blinking.
2-Level Task Light
4-Speed Fan Speed Control
10-Minute Delay Off
30-Hour Filter Clean Reminder
Down / Retract Chimney
Up Button
Control Panel and Up Button
Install Cooking Appliance
1. Align the cooking appliance with downdraft and fasten appliance
in place following appliance instructions.
Note: Accurate alignment of cooking appliance and downdraft is
necessary to ensure that there is no interference when air vent is raised
and lowered. There should be a gap of 1/32" - 1/16 " between the back
of the cooktop and the front of the downdraft cover.
Loading ...
Loading ...
Loading ...