Loading ...
Loading ...
Loading ...
11
Planning
CAUTION
BEFORE CUTTING HOLE IN CABINET FOR DUCTWORK,
check for interference with fl oor joists, wall studs,
electrical wiring, or plumbing.
Use the dimensions in illustrations to help plan how and where to
provide duct access through your cabinet. A 1-7/8" x 19" rectangular
duct can be used through left, right, fl oor and back of cabinet. Also,
8" round or 10” round can also be used through cabinet fl oor.
For left, right, or rear exhaust: Allow at least 18" for transition and
elbow or blower.
For left / right exhaust: a 30" deep cabinet is recommended to
align properly with fl ex blower. Flex blower can be mounted to rear
cabinet wall or to a platform / frame (not provided) on the base of
the cabinet fl oor. (See fl ex blower instructions).
Note: Flex blower can only attach to the front of the downdraft.
Cabinet depths of 24" to 30" are required - depending on the
type of cooking appliance.
If using a Recirculating Kit, see “Plan the installation”
section of the installation instructions packaged with the kit.
Cabinet Cutouts
Rear Ducting Cutout
21"
(53.3 cm)
21"
(53.3 cm)
Appliance
Cutout
4"
(10.2 cm)
24-3/4"
(62.9 cm)
24-3/4"
(62.9 cm)
4"
(10.2 cm)
5-7/8"
(14.9 cm)
5-7/8"
(14.9 cm)
21"
(53.3 cm)
21
"
(53.3 cm)
Appliance
Cutout
2"
(5.1 cm)
Side Ducting Cutout
Below Ducting Cutout
Appliance
Cutout
Center line of downdraft
1-1/8"
(2.9 cm)
1-1/8"
(2.9 cm)
4"
(10.2 cm)
4"
(10.2 cm)
21"
(53.3 cm)
21"
(53.3 cm)
Loading ...
Loading ...
Loading ...