Loading ...
Loading ...
Loading ...
12 | English
tery pack may create a risk of fire when used with another
battery pack.
u Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
u When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
u Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
u Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
u Do not expose a battery pack or tool to fire or excess-
ive temperature. Exposure to fire or temperature above
130 °C may cause explosion.
u Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
u Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
u Never service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety Warnings for Sander
u Only use the power tool for dry sanding. Water entering
a power tool will increase the risk of electric shock.
u Warning: Danger of fire! Avoid overheating the work-
piece and the sander. Always empty the dust collector
before taking a break from work. Sanding dust in the
dust bag, microfilter, paper bag (or in the filter bag or va-
cuum cleaner filter) can spontaneously combust under
certain conditions, for example if flying sparks are cre-
ated when sanding metals. This risk is increased if the
sanding dust is mixed with paint or polyurethane residue
or with other chemical substances and if the workpiece is
hot as a result of prolonged work.
u Clean the air vents on your power tool regularly. The
motor’s fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
u Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
u Always wait until the power tool has come to a com-
plete stop before placing it down.
u In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u Do not open the battery. There is a risk of short-circuit-
ing.
u The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water and moisture. There is a risk of explo-
sion.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding and polishing of
wood, filler and varnished surfaces. It is particularly well-
suited for profiles, corners and hard-to-reach areas.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Battery charge indicator/overload indicator
(2)
On/off switch
(3)
Battery
A)
(4)
Battery release button
(5)
Sanding sheet
A)
(6)
Sanding plate
(7)
Handle (insulated gripping surface)
(8)
Extraction outlet
(9)
Dust protection cover
(10)
Dust extraction adapter
A)
(11)
Extraction hose
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 4N7 | (04.12.2018) Bosch Power Tools
Loading ...
Loading ...
Loading ...