Loading ...
Loading ...
Loading ...
13
Holding the Trimmer
Before operating the hedge trimmer, stand in the operating
position and perform the following checks:
1. You are wearing all of the necessary personal protective
equipment, including protective gloves, non-slip footwear,
safety goggles, ear defenders, and close-tting clothing.
2. You are holding the unit rmly with both hands. Your right
arm is slightly bent and is holding the rear handle, and
your left arm is straight and is holding the front handle.
3. You are standing with proper footing and are holding the
hedge trimmer so that the cutting blades are always away
from your body.
mWARNING! Always keep both hands on the hedge
trimmer handles. Never hold shrubs with one hand and operate
the hedge trimmer with the other. Improper handling of the
hedge trimmer could result in serious injury.
The secondary switch on the front handle can be activated
on all three sides, together with the 180 degree rotatable rear
handle, providing comfortable grip when performing cutting
operations in dierent positions (Figs. 8A, 8B & 8C).
To rotate the rear handle, follow the instruction below:
1. Stop the machine. Wait until the unit comes to a
complete stop.
2. Press and hold the handle lock button, and rotate the rear
handle clockwise or counterclockwise as needed (Fig. 9).
3. Hold the unit as indicated above and resume working.
Starting + Stopping
mWARNING! Ensure the blade does not touch any
objects before turning on the hedge trimmer.
mCAUTION! Starting, stopping, and restarting an DC
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless hedge trimmer, always wait at least ve seconds after
stopping before restarting the hedge trimmer.
This hedge trimmer is equipped with two switches. Both
switches need to be pressed to start the hedge trimmer. Follow
the instruction below.
1. Insert the battery in the battery compartment (Fig. 10).
2. To start the tool, hold the tool as described in gs. 8A,8B
& 8C, then press and hold the safety button on either side,
and squeeze the On/O switch and secondary switch at
the same time. Wait for the tool to reach a stable speed,
and release the safety button (Fig. 11).
Fig. 8A
Fig. 8B
Fig. 8C
Fig. 9
Rear
handle
Handle lock button
Fig. 10
Battery
Battery
compartment
Loading ...
Loading ...
Loading ...