Loading ...
Loading ...
Loading ...
36 / EN
Washing Machine / User Manual
4
Turn off the filter full warning by pressing the Filter replacement auxiliary function button (
) on the
screen for 3 seconds.
5 Replace the full FiberCatcher filter box with a new one and never clean the inside of the box.
4.4.3 Cleaning the loading door and the drum
For products with drum cleaning programme, please see Operating the product - section.
C
Repeat Drum Cleaning process in every 2 months.
WARNING: Use an anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is left in the
product.
If the holes on the bellow shown in the figure is blocked, open the holes
using a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the
stains on the drum surface by using cleaning agents for stainless steel.
Never use steel wool or wire wool. These will damage the painted,
chrome coated and plastic surfaces.
We recommend you to wipe the bellows with a dry and clean cloth at the
end of the programme. This will remove residues on the bellows in your
machine and prevent formation of malodours.
4.4.4 Cleaning the body and control panel
Wipe the body of the product with soapy water or non-corrosive mild gel detergents as necessary, and dry
with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
4.4.5 Cleaning the water intake filters
There is a filter at the end of each water intake valve at the rear of the product and also at the end of each
water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in
the water to enter the product. Filters should be cleaned if they are dirty.
1 Close the taps.
2 Remove the nuts of the water intake hoses to
access the filters on the water intake valves and
clean them with an appropriate brush. If the filters
are too dirty, remove them from their places with a
pliers and clean in this way.
3 Take out the filters on the flat ends of the water
intake hoses together with the gaskets and clean
thoroughly under running water.
4 Replace the gaskets and filters carefully and
tighten their nuts by hand.
4.4.6 Draining remaining water and cleaning the pump filter
The filter system in your product prevents solid items such as buttons, coins and fabric fibres clogging the
pump impeller during draining of washing water. Thus, the water will be drained without any problem and the
service life of the pump will extend.
Loading ...
Loading ...
Loading ...