Loading ...
Loading ...
Loading ...
31 / EN
Washing Machine / User Manual
4.3.13 Cancelling the programme
The programme is cancelled when programme selection knob is turned to a different programme or machine
is turned off and on again using the programme selection knob.
C
If you turn the programme selection knob when the Child Lock is enabled, the programme will not be cancelled. You should
cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading
door since the water level in the machine is above the loading door baseline, then turn the Programme Selection knob to
Pump+Spin programme and drain the water in the machine.
4.3.14 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators
are turned off.
Completed programme steps will be displayed if you press any button.
4.3.15 Microfiber Filtering Feature
A filter is available for removing fibres coming off of your synthetic clothes or clothes with synthetic fabric
from the water that can be fitted in and out of the detergent drawer. Microfibers and other solid particles are
separated by the thin filter.
The filtering feature runs on Synthetic, Mixed, Sports-Outdoor, Curtain, Shirt programmes*.
Filtering process is carried out automatically during the programme. Filtering is carried out before discharge
steps in the programme in your washing machine.
These programmes use FiberCatcher™ technology, so you are helping to respect our rivers and oceans by
preventing plastic microfibres from being released into our precious water sources.
* Programmes may vary depending on the model you purchased.
Read the product care label before washing your laundry. Do not wash your clothes with cotton and wool in
programmes where this feature is active. Use liquid or capsule detergents for extending filtering lifecycle in
programmes with filtering feature.
4.3.16 HomeWhiz Feature and Remote Control Function
HomeWhiz allows you to use your smart device to check your washing machine and get information about its
status. With HomeWhiz application you can use your smart device to perform various procedures that can also
be performed on the machine. Plus, you can use some features only with the HomeWhiz function.
You must download the HomeWhiz application from the app store of your smart device to use the bluetooth
feature of your machine.
Make sure that your smart device is connected to internet to install the app.
If you are using the app for the first time, please follow the on-screen instructions to complete your user
account registration. Once the registration procedure is complete, you can use all products with the HomeWhiz
feature in your house on this account.
You can touch the “Appliances” tab in the HomeWhiz application to view appliances paired with your account.
Following the installation of the application, HomeWhiz function enables the washing machine to send you
instant notifications via your smart appliance.
C
To use the HomeWhiz function, the app must be installed on your smart device and your washing machine must be paired to
your smart device via bluetooth. If your washing machine is not paired to your smart device it works as an appliance which
does not have a HomeWhiz feature.
Your product will operate as paired to your smart device via bluetooth. The controls made by means of the application will be enabled
through this pairing; therefore the bluetooth signal strength between the appliance and the smart device must be adequate.
Please visit www.homewhiz.com to see the Android and iOS versions supported by the HomeWhiz application.
A
WARNING: All the safety measures described in "GENERAL SAFETY INSTRUCTIONS" section of your user
manual apply to the remote operation through HomeWhiz function as well.
Loading ...
Loading ...
Loading ...