Loading ...
Loading ...
Loading ...
6
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
8669).
STEP 1:
Attach 2 Adjusting Pads (No. 5) and 2 Hex Nuts
(No. 6) to the Rear Stabilizer (No. 3) by using
Wrench (No. 88).
Unscrew the preassembled 4 Hexagon Socket Head
Screws (No. 8) with Allen Wrench (No. 87). Then
remove the 4 Flat Washers (No. 7) and 2 Shipping
Tubes (No. 35) from the Main Frame (No. 1).
Attach the Front & Rear Stabilizer (No. 2 & No. 3)
to the Main Frame (No. 1) using 4 Hexagon Socket
Head Screws (No. 8), 4 Flat Washers (No. 7) that
were just removed. Tighten and secure with the Allen
Wrench (No. 87).
NOTE: You can discard the Shipping Tubes (No.
35) or save them for future packaging or
transportation.
STEP 2:
IMPORTANT! Read instructions carefully. Failure
to follow instructions may cause permanent
damage to your bike.
Remove the Left & Right Nylon Nuts (No. 98L/R)
located on the Pedals (No. 97L/R). The Right Nylon
Nut (No. 98R) is white on the inside. The Left Nylon
Nut (No. 98L) is blue on the inside.
Screw the Left Pedal (No. 97L) COUNTER-
CLOCKWISE into the Left Crank (No. 12L) by using
the Wrench (No. 89). Once it is properly screwed into
the place, use the Wrench (No. 89) to hold the bolt of
the pedal and screw the Left Nylon Nut (No. 98L)
CLOCKWISE to the thread end of the Left Pedal (No.
97L) securely with Wrench(No. 88).
Screw the Right Pedal (No. 97R) CLOCKWISE into the
Right Crank (No. 12R) by using the Wrench (No. 89).
Once properly screwed into the place, use the Wrench
(No. 89) to hold the bolt of the pedal and screw the
Right Nylon Nut (No. 98R) COUNTER-CLOCKWISE
to the thread end of the Right Pedal (No. 97R) securely
with Wrench (No. 88).
Loading ...
Loading ...
Loading ...