Loading ...
Loading ...
Loading ...
D:\TV's JOB\SONY TV\SY0429_A8\4411857E11_GB\GB07PRE.fm
KDL-55HX850 / 46HX850
4-411-857-E1(1)
25
GB
Additional Information
Additional Information
Safety
Information
WARNING
Batteries must not be exposed
to excessive heat such as
sunshine, fire or the like.
Installation/Set-up
Install and use the TV set in
accordance with the
instructions below in order to
avoid any risk of fire, electrical
shock or damage and/or
injuries.
Installation
The TV set should be
installed near an easily
accessible AC power outlet.
Place the TV set on a stable,
level surface to avoid it from
falling down and cause
personal injury or damage to
the TV.
Only qualified service
personnel should carry out
wall installations.
For safety reasons, it is
strongly recommended that
you use Sony Wall-mount
bracket. For details, consult
Sony service centre.
Be sure to use the screws
supplied with the Wall-mount
bracket when attaching the
mounting hooks to the TV set.
The supplied screws are
designed so that they are
8 mm to 12 mm in length
when measured from the
attaching surface of the
mounting hook.
The diameter and length of
the screws differ depending
on the Wall-mount bracket
model.
Use of screws other than
those supplied may result in
internal damage to the TV set
or cause it to fall, etc.
Transporting
Before transporting the TV
set, disconnect all cables.
Two or three people are
needed to transport a large
TV set.
When transporting the TV set
by hand, hold it as shown
below. Do not put stress on
the LCD panel and the frame
around the screen.
When transporting the TV set,
do not subject it to jolts or
excessive vibration.
When transporting the TV set
for repairs or when moving,
pack it using the original
carton and packing material.
Ventilation
Never cover the ventilation
holes or insert anything in the
cabinet.
Leave space around the TV
set as shown below.
It is strongly recommended
that you use a Sony wall-
mount bracket in order to
provide adequate air-
circulation.
Installed on the wall
Installed with stand
To ensure proper ventilation
and prevent the collection of
dirt or dust:
Do not lay the TV set flat,
install upside down,
backwards, or sideways.
Do not place the TV set on
a shelf, rug, bed or in a
closet.
Do not cover the TV set
with a cloth, such as
curtains, or items such as
newspapers, etc.
Do not install the TV set as
shown below.
AC power cord
Handle the AC power cord and
outlet as follows in order to
avoid any risk of fire, electrical
shock or damage and/or
injuries:
Use only Sony supplied AC
power cords, not those of
other brands.
Insert the plug fully into the
AC power outlet.
Operate the TV set on a
220 V AC supply only.
When wiring cables, be
sure to unplug the AC
power cord for your safety
and take care not to catch
your feet on the cables.
Disconnect the AC power
cord from the AC power
outlet before working on or
moving the TV set.
Keep the AC power cord
away from heat sources.
Unplug the AC power plug
and clean it regularly. If the
plug is covered with dust
and it picks up moisture, its
insulation may deteriorate,
which could result in a fire.
Notes
Do not use the supplied AC
power cord on any other
equipment.
Do not pinch, bend, or twist
the AC power cord
excessively. The core
conductors may be exposed
or broken.
Do not modify the AC power
cord.
Mounting Hook
Hook attachment
on rear of TV set
Screw (supplied
with the Wall-
mount bracket)
8 mm - 12 mm
30 cm
10 cm
10 cm
10 cm
Leave at least this space
around the set.
30 cm
10 cm
10 cm
6 cm
Leave at least this space
around the set.
Air circulation is blocked.
Wall Wall
(Continued)
Loading ...
Loading ...
Loading ...